- Residential  
- Agricultural  
- Architectural  
- Light Commercial / Industrial  
- Post-Frame Buildings  
- Retrofit over existing roof  
- Garages, porches, gazebos, etc.

The JM 1.75 Series is designed and tested to withstand direct impacts from winds at up to 
140 mph. It offers  architectural detailing to fit any roof system with a 1 3/4 inch rib to add 
depth and style.

Colors  
- Wide variety of colors available. Please consult chart. Chips available upon request.

Availability  
- 24 Gauge ONLY  
- Lengths are 3'0" Minimum and 50'0" Maximum  
- Width available in 18" ONLY  
- Striations are suggested  
- Clips are required

Slope  
- Minimum slope requirement is 2:12 pitch. 
- Slopes less than 2:12 pitch must be pre approved by JM Metals.

Flashing  
- All flashing are to be produced in the same gauge as the roof system, unless otherwise 
  specified.  
- Please refer to manufacturer's suggested details.

Substrate  
- The JM 1.75 Panel is to be installed over solid decking